Right hand heavy duty chrome OE spec mirror, especially suited to Cali models

M10 bolt thread. Originally fitted to Cali Special and Nevada 750 models

 1 in stock

 03769430 GU03769430 03 76 94 30
 0376 9430 0376.9430 03.76.94.30

Pair of universal chromed handlebars, low rise

Not suitable for V65 GT, Mille GT or other models with wide handlebar clamps. Note wide spacing of knurled sections sits outside handlebar clamps on T3, V50 etc... - see dimensions if in doubt about suitability for your bike

 1 in stock

1 litre of Rotra MP EP80/90 mineral based gear oil for gearboxes and drive boxes

Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. Surpasses API GL-5, MIL L 2105 D, MAN 342 type M1, MAN 342 type M2 (Approved)
Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

 This part is due back in stock soon, call 01484 841395 to reserve yours

Replacement pannier to frame lock for all Hepco and Becker panniers. This is the lock at the rear of the panniers that secures it to the pannier frame plate

Supplied with key, barrel, lock plate, rivets and fitting instructions. Includes pannier frame plate LUA70114

 1 in stock

Replacement top box to rear luggage rack lock for Hepco and Becker Junior top boxes / top cases. This is the lock at the base of the top box which attaches it to the luggage rack

Supplied with key, rivets, lock plate and fitting instructions

 1 in stock

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

 1 in stock

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

6 pin male block connector, used for main loom connections. See ELA30001 for female 6 block connector.

 1 in stock

200073020

Five piece decal set, gold lettering. Three larger decals, two smaller decals

 1 in stock

Pair of organic EBC FA256 rear brake pads

Twin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248

 1 in stock

AP8133798